nixos-config/patches/ayame/0014-ASoC-Intel-bytcr_wm5102-Add-jack-detect-support.patch
2021-07-30 11:25:02 +02:00

124 lines
4.1 KiB
Diff

From 0070a092a0e9febbd370c6e63412b8b2317b777c Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Wed, 23 Dec 2020 13:11:15 +0100
Subject: [PATCH 14/14] ASoC: Intel: bytcr_wm5102: Add jack detect support
The Linux Arizona/WM5102 driver uses the MFD framework to create several
sub-devices for the WM5102 codec and then uses a driver per function.
The jack-detect support for the WM5102 codec is handled by the
extcon-arizona driver. This driver exports info about the jack state
to userspace through the standard extcon sysfs class interface.
But standard Linux userspace does not monitor/use the extcon sysfs
interface for jack-detection.
The extcon-arizona driver can also report jack-detect state through
the standard ASoC jack interface. For this we need to create a
snd_soc_jack and pass this to the extcon-arizona driver through the
shared arizona data struct.
The extcon-arizona code already depends on (waits for with -EPROBE_DEFER)
the snd_card being registered by the machine driver, so this does not
cause any ordering issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
sound/soc/intel/boards/bytcr_wm5102.c | 36 ++++++++++++++++++++++++++-
1 file changed, 35 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/bytcr_wm5102.c b/sound/soc/intel/boards/bytcr_wm5102.c
index 7de09cb5c50e..25c7a6cacaad 100644
--- a/sound/soc/intel/boards/bytcr_wm5102.c
+++ b/sound/soc/intel/boards/bytcr_wm5102.c
@@ -13,11 +13,13 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/init.h>
+#include <linux/input.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
+#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
@@ -31,6 +33,8 @@
#define WM5102_MAX_SYSCLK_11025 45158400 /* max sysclk for 11.025K family */
struct byt_wm5102_private {
+ struct snd_soc_jack jack;
+ struct arizona *arizona;
struct clk *mclk;
struct gpio_desc *spkvdd_en_gpio;
};
@@ -184,11 +188,22 @@ static const struct snd_kcontrol_new byt_wm5102_controls[] = {
SOC_DAPM_PIN_SWITCH("Speaker"),
};
+static struct snd_soc_jack_pin byt_wm5102_pins[] = {
+ {
+ .pin = "Headphone",
+ .mask = SND_JACK_HEADPHONE,
+ },
+ {
+ .pin = "Headset Mic",
+ .mask = SND_JACK_MICROPHONE,
+ },
+};
+
static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime)
{
struct snd_soc_card *card = runtime->card;
struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
- int ret;
+ int ret, jack_type;
card->dapm.idle_bias_off = true;
@@ -217,6 +232,22 @@ static int byt_wm5102_init(struct snd_soc_pcm_runtime *runtime)
return ret;
}
+ jack_type = SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 |
+ SND_JACK_BTN_2 | SND_JACK_BTN_3;
+ ret = snd_soc_card_jack_new(card, "Headset", jack_type,
+ &priv->jack, byt_wm5102_pins,
+ ARRAY_SIZE(byt_wm5102_pins));
+ if (ret) {
+ dev_err(card->dev, "Error creating jack: %d\n", ret);
+ return ret;
+ }
+ snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
+ snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
+ snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
+ snd_jack_set_key(priv->jack.jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
+
+ priv->arizona->jack = &priv->jack;
+
return 0;
}
@@ -409,6 +440,8 @@ static int snd_byt_wm5102_mc_probe(struct platform_device *pdev)
/* Note no devm_ here since we call gpiod_get on codec_dev rather then dev */
priv->spkvdd_en_gpio = gpiod_get(codec_dev, "wlf,spkvdd-ena", GPIOD_OUT_LOW);
+
+ priv->arizona = dev_get_drvdata(codec_dev);
put_device(codec_dev);
if (IS_ERR(priv->spkvdd_en_gpio))
@@ -452,6 +485,7 @@ static int snd_byt_wm5102_mc_remove(struct platform_device *pdev)
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct byt_wm5102_private *priv = snd_soc_card_get_drvdata(card);
+ priv->arizona->jack = NULL;
gpiod_put(priv->spkvdd_en_gpio);
return 0;
}
--
2.28.0